The DPF captures particles from exhaust gas, and accumulated deposits can increase flow resistance. Before cleaning, we assess filter condition and why deposits have built up, since sensor or engine faults can cause the problem to return. Washing cannot restore a cracked or melted internal element, so suitability for treatment is checked separately. After cleaning and preparation, backpressure or flow capacity is assessed again using an appropriate method. You receive the test result and recommendations addressing the cause of contamination.
Elevated backpressure or DPF performance deviations found during diagnosis.
Recurring particulate filter loading messages.
What's included
Assess filter condition and the basis for cleaning.
Perform an initial backpressure or flow-capacity check.
Clean a suitable filter and prepare it after washing.
Retest and report on the causes of deposit build-up.
Additional checks
Sensor or engine faults that could cause the filter to become contaminated again
Whether the internal element is cracked or melted, which determines suitability for treatment
Why it matters
Cleaning without assessing the cause of deposits can leave an engine or control fault unresolved. A mechanically damaged filter needs a different solution.
More details
Professional DPF and catalyst cleaning with contamination, backpressure, flow capacity, and post-wash testing.
Professional DPF Cleaning
Diesel particulate filter cleaning for passenger and commercial vehicles
We perform professional cleaning of DPF filters and catalytic converters using specialized equipment.
Before the procedure, we determine:
the level of contamination
flow capacity
back pressure
any mechanical damage
whether cleaning is worthwhile
After cleaning we perform:
drying
re-testing
before/after comparison of readings
photo and video documentation of the result
Why the DPF Clogs Again
We don't just wash the filter — we help find the cause
Fast repeat clogging of the DPF can be caused by: faulty injectors; excessive fuel delivery; turbo problems; oil entering the exhaust; a faulty EGR; low compression; faulty temperature or pressure sensors; consistently short city trips; unsuccessful software/ECU tuning interference; a faulty regeneration system.
At Bus Pro Service you can check the fuel system, engine, turbo, EGR and DPF at the same time.
This reduces the risk of a cleaned filter clogging again quickly.